English 
Spanish 
-
Single vs Double Acting Cylinders: Key Differences
01 Single-acting cylinder Single-acting hydraulic cylinders transmit hydraulic fluid or output force in only one direction to achieve movement in one direction. Only one end of the two chambers of the cylinder has oil, and the other end is in contact with air. In the hydraulic cylinder, the piston rod can be pushed in one…
-
HANNOVER MESSE 2026 JW CYLINDER booth No. Hall:017, Booth:B66-20
Welcome to JW CYLINDER booth in HANNOVER MESSE 2026 exhibition!JW booth No.: Hall:017, Booth:B66Exhibition time: April 20 – 24thExhibition address: Messegelände, 30521 Hannover, GermanyCenter: Hannover exhibition center Contact: Nancy ZhuEmail: nancy@jwgroup.ccWeb: jwcylinder.comMobile/Whatsapp: +86 15902166721 HYDRAULIC CYLINDERTechnical Specifications:Max Design Pressure: 70 MPaBore Diameter: 25 – 1200 mm (1 – 45 inches)Rod Diameter: 12–500 mm (½–20 inches)Max…
-
Designing Waterproof Seals for Hydraulic Cylinders
A brief introduction to the waterproof seal structure design of a hydraulic cylinder product. The design of the “waterproof ring” (usually an O-ring) of the hydraulic cylinder is different from that of the “dustproof ring” in terms of function and location, but together they constitute a complete sealing and protection system for the hydraulic cylinder.…
-
Robot Challenge Screen: Explore Hydraulic Cylinder Insights
In the manufacturing process of hydraulic cylinders, three crucial elements determine their performance and lifespan: cylindricity, straightness, and coaxiality. These three core geometric tolerances constitute the core challenge in hydraulic cylinder manufacturing. They interact and collectively determine the performance and lifespan of the hydraulic cylinder. The difficulty in controlling these tolerances lies not only in…
-
What is the durability of a hydraulic cylinder? How is it tested?
“Hydraulic Cylinders” standard specifies requirements for the durability of hydraulic cylinders. What exactly is hydraulic cylinder durability, and how is it tested? Let’s try to analyze this. Durability 1. Double-acting hydraulic cylinders: When the piston stroke L ≤ 500mm, the cumulative stroke shall be ≥ 100km; when the piston stroke L > 500mm, reversing is…
-
Comparing Ultra-High-Speed Surface Treatments for Cylinders
“Ultra-high-speed” surface treatment technology refers to a class of techniques that accelerate sprayed or deposited materials to supersonic speeds (typically above 340 meters per second) and process them at extremely high speeds (such as tens or even hundreds of meters per minute). Compared to traditional techniques, it can produce denser, more strongly bonded, and higher-performing…
-
Hydraulic Cylinder Leakage: Low Pressure Testing Guide
“Hydraulic Cylinders – Test Methods” standard describes the operational and leakage tests under low pressure: What is hydraulic cylinder leakage under low pressure? How to test for leakage in a hydraulic cylinder under low pressure? Operation and Leakage Test at Low Pressure (1) Procedure Adjust the test system pressure and flow rate so that the…
-
What are solutions for preventing corrosion of hydraulic cylinders after factory testing
How can hydraulic cylinders be protected against corrosion? After the hydraulic cylinder factory test is completed, compressed air is generally used to drain the hydraulic fluid from the cylinder back into the oil tank. This method offers the advantages of high efficiency, thoroughness, no residual secondary pollution, rapid drying, and extremely low cost, making it…
-
What is the function of a dust cover for a hydraulic cylinder
The hydraulic cylinder dust cover, often considered the “first line of defense” for hydraulic cylinders, has a core mission that goes far beyond simply preventing dust. Through physical isolation, it protects the internal components from external contamination and damage, making it a crucial external component that determines the reliability, maintenance cycle, and service life of…
